Royal Sliding Screen Doors Kits are cut to your exact measurements with rollers and handle installed.  Simply put the frame together using the internal corners, spline in the screen material with the included spline roller.

Royal Sliding Screen Doors are made with a strong extruded aluminum frame so they will not corrode or rust.  They are delivered to your door completely assembled and ready to install. The Royal Door features:

• Made to order from your custom dimensions.
• Fade resistant handle with locking mechanism on inside. NO HANDLE ON THE OUTSIDE.
• Wheel adjustment on the side of the door allowing for easy access:
• 5 frame colors:  white, silver, bronze, beige, and silver.
• Available in a variety of screen materials.

The Royal Sliding Door is a 1/2 inch thick where it fits into the top track but extrudes out to 3/4 inch thick almost 3/4" from the top, sides and bottom

Measuring your Sliding Screen Door

If you have an existing screen door.  Measure it to get your measurements.

If you do not have an existing door, see below for a measuring guide to help you measure for your door. ONCE YOU HAVE THE HEIGHT MEASUREMENT SUBTRACT 1/8" TO 1/4" FROM THAT TO ALLOW FOR SOME WIGGLE ROOM.